ZOPO MOBILE BLOG

How to flash Zopo mobile, ZOPO ZP900, Zopo ZP300+, ZOPO ZP200 Updating Video English Guide »« Solution for invalid imei on zopo zp500+

English guide for writing valid imei number for zopo phone

For some reason, some area sim card operator ask for special valid imei number for mobile phone. and i am here with english instruction for solve invalid imdi number for zopo mobile phone. this is guide only recommend use on zopo zp900, and zp300+ plus, the mtk6577 mobile phone, because for other zopo models, we have easier method, plz reference here

For model zopo zp500+ plus:

http://www.zopomobileshop.com/zopo-rom/solution-for-invalid-imei-on-zopo-zp500/

For other zopo mobile phone model zp100, zo200, zp300, zp500, plz have a reference here: 

http://www.zopomobileshop.com/zopo-rom/zopo-zp100-imei-number-writing-english/

For zopo zp900, zopo zp900s zp300 plus, ZP200+pLUS, zp910, zp810, zp950+

1- go to em  DO NOT CHANGE ANY OTHER DATA EXCEPT MENTION BELOW, OR ANY UNHAPPY THING HAPPEND LIKE PHONE DEAD, JESSICA DO NOT RESPONSIBLE FOR IT.
Just type it on call pad
 “* # * # 3646633 # * # *”  zopo zp900, zp900s, 300+, zp900,zp950, zp950+,zp910, zp810
“ *#15963#*” zp200+
2- then follow that path –> CDS info –> Radio info –> Phone1 (for the first imei)
3- at the top there is a command line which begins “AT+” just type there “AT +EGMR=1,7,”IMEI_1″ (instead of IMEI_1 put your first imei number)
4- hit send command
5-if you done just reboot the phone, if you change the second imei go to step 2 and select “Phone2″
6-and enter the code “AT +EGMR=1,10,”IMEI_2″ (instead of IMEI_2 put your second imei number) hit send command
7-reboot
8-Dail ” *#06#” Check Imei(onlyshow the first one)

 

Video guide for change zopo model imei number

 

 

Thank you

Jessica Tang

ZopoMobile Shop

 

 

7.35K
, ,
25/09/2012 at 11:06
62 comments »
  • 25/09/2012 at 14:36Munci Abdullah Poyraz

    Dear Jessica

    When I connect my phone to the computer with usb’s new driver. but breaking up over and over again. VCOM usb connection so I can not do this. mtk driver installed preload. but somehow is not connecting. usb connected drifting again. could you help me.

    • 26/09/2012 at 03:58Jessica Tang zopo

      hello,
      the most easy way to install driver is to install this apk
      http://www.snappea.com/
      it will install for us auto.
      hope it help u.
      thank you

  • 27/09/2012 at 18:30lionelcgz

    Hello.
    I have tested the procedure to change IMEI in a ZP300+.
    It seems that doesn’t work. Or I don’t understand.
    You say that the phone must be connected to the USB cable, but in off position. How the computer can find the cellphone if he is off?
    You say to install a file on the ROM. But how to get the ROM folders?
    Is it possible to have something easier and with more details?
    Where is it possible to see the 2 IMEI before changment?
    Thank you.

    • 16/10/2012 at 09:47Jessica Tang zopo

      hi, i have made a video. hope it help you.
      thank you

      • 24/10/2012 at 19:28lionelcgz

        I have changed the 2 IMEI.
        That’s perfect and this way is the real easiest way to change IMEI on ZP300+
        Thank you very much

  • 06/10/2012 at 14:43Manuel

    zopo mobile phone imei writing apk …
    Please the same apk for zopo zp300+ !!!
    Have a nice day,
    Manuel

    • 16/10/2012 at 09:46Jessica Tang zopo

      hi, i have made a video. hope it help you.
      good day!

    • 23/10/2012 at 05:39Jessica Tang zopo

      hi, try this
      1- go to em with this code “* # * # 3646633 # * # *” (just type it on call pad)
      2- then follow that path –> CDS info –> Radio info –> Phone1 (for the first imei)
      3- at the top there is a command line which begins “AT+” just type there “AT +EGMR=1,7,”IMEI_1″ (instead of IMEI_1 put your first imei number)
      4- hit send command
      5-if you done just reboot the phone, if you change the second imei go to step 2 and select “Phone2″
      6-and enter the code “AT +EGMR=1,10,”IMEI_2″ (instead of IMEI_2 put your second imei number) hit send command
      7-reboot

      • 23/10/2012 at 12:06Manuel

        Obrigado (Merci) à Enes et à Jessica !
        Have a nice day.
        Manuel

  • 16/10/2012 at 14:22ercinkacar

    zopo leader zp900s ? can we change it ? 512 mb version of zp900

    • 17/10/2012 at 08:01Jessica Tang zopo

      hi, we can use this solution to change zp900s
      thank you

  • 18/10/2012 at 17:27Miki

    Hi, are you working on solving the flash camera problem? In the night photos, the flash make white scenes.

    I have no problem opening the phone to solve, but i need a disassembly guide or tutorial. Please take note.

    • 19/10/2012 at 08:28Jessica Tang zopo

      hi, what is your mobile model? thank you

  • 19/10/2012 at 08:48enes

    ı am not change imei
    install sneppea
    all driver
    but

    all test error with win xp win 7

    comm port doesn’t exist or can’t sync with phone

    please help me

    • 20/10/2012 at 02:24Jessica Tang zopo

      hi, it seems that you have not got the right DATABASE
      as in the PDF instruction, step E, F.
      Database, must be in the same folder of ROM, and you need to check your rom version(how? Setting -about phone-built number), and the data base should be the same version, or would not write successfully.
      the database here, all are the latest rom version.
      http://www.zopomobileshop.com/en/content/9-download-zopo-mobile-latest-rom,
      let me know what is your model, and the rom version(how? Setting -about phone-built number), maybe i can emai you the data base.
      good day.

  • 20/10/2012 at 08:22enes

    ltes rom install install
    e,f sellect true
    but comm port doesn’t exist or can’t sync with phone
    build number zp900 20120912-155136
    baseband version MAUI.11AMD.W12.22.SP.V5,2012/07/25 20:13
    why ? about phone-status-imei information-
    imei(stot1)
    imei sv (stot1)

    not find
    imei(stot2)
    imei sv (stot2)

  • 20/10/2012 at 19:02enes

    tankyou help me
    ı am not proplem

    1- go to em with this code “* # * # 3646633 # * # *” (just type it on call pad)
    2- then follow that path –> CDS info –> Radio info –> Phone1 (for the first imei)
    3- at the top there is a command line which begins “AT+” just type there “AT +EGMR=1,7,”IMEI_1″ (instead of IMEI_1 put your first imei number)
    4- hit send command
    5-if you done just reboot the phone, if you change the second imei go to step 2 and select “Phone2″
    6-and enter the code “AT +EGMR=1,10,”IMEI_2″ (instead of IMEI_2 put your second imei number) hit send command
    7-reboot

    • 23/10/2012 at 02:27Jessica Tang zopo

      great,thank you Enes。 i have test is with zp900 and zp900s, it works. if you do not mind, i make a video to show other users how to do it.
      it is much more easier. many thanks again.(: good day!

    • 25/10/2012 at 05:33lionelcgz

      Thank you very much. Your methode is the easiest way to change the IMEI. Great job ! ;-)

      • 25/10/2012 at 05:39Jessica Tang zopo

        and thank you Enes. he share it with us. have a great day! (:

  • 22/10/2012 at 08:18A. Daftari

    I tried the IMEI application. I installed the drivers as required (WinXP SP3), downloaded the Database. When I connect the phone for the writing, I get a message about CDC Serial and there are no drivers. Of course the IMEI writing fails at this point.

    • 23/10/2012 at 04:42Jessica Tang zopo

      hi, try this
      1- go to em with this code “* # * # 3646633 # * # *” (just type it on call pad)
      2- then follow that path –> CDS info –> Radio info –> Phone1 (for the first imei)
      3- at the top there is a command line which begins “AT+” just type there “AT +EGMR=1,7,”IMEI_1″ (instead of IMEI_1 put your first imei number)
      4- hit send command
      5-if you done just reboot the phone, if you change the second imei go to step 2 and select “Phone2″
      6-and enter the code “AT +EGMR=1,10,”IMEI_2″ (instead of IMEI_2 put your second imei number) hit send command
      7-reboot

      • 23/10/2012 at 07:17A. Daftari

        Thank you very much. It worked. You can also use Mobileuncle Tools to get EM on your phone. Email me if you want the apk

  • 22/10/2012 at 19:08enes

    zp900 imei change dual imei but

    1. sim ı am talks but 2. sim can not reach me

    zp900 dual sim dual standby but dual sim mono standby

    • 23/10/2012 at 03:47Jessica Tang zopo

      is it the sim slot problem?

      • 23/10/2012 at 17:02enes

        What is the solution

      • 26/10/2012 at 08:59enes

        Answer the proplem

        • 27/10/2012 at 07:20Jessica Tang zopo

          replace a sim slot.

          • 28/10/2012 at 01:08enes

            replace a sim slot. but not change proplem, mono standby

  • 24/10/2012 at 20:13lionelcgz

    Hello again.
    After the IMEI solved on my ZP300+, I have another big problem concerning MMS.
    I can’t send or received MMS. While SMS works fine.
    The APN are however the good ones from my provider and are automaticly installed.
    I don’t understand where the problem comes from.
    Could you help me?
    Thank you.

    • 24/10/2012 at 20:24thay

      Android phones needs active 3g connection for mms download.Activate it and try again,if your apn list is correct should work.In persistance of the issue contact your provider about it
      Regards

      • 25/10/2012 at 05:29lionelcgz

        Hello.
        Thank you for your answer.
        I disagree. Android phones don’t need to be activated in 3g. When you need to send MMS, the phone automaticly activate the data connection. So it should works in Edge mode too. In my case, nothing happens even if I connect the phone to the data connection myself. I have another android phone in 2.3.6 and it works perfectly.
        I have contacted my provider but because the phone is not referenced in their list of cellphone they are unable to help me.

        • 25/10/2012 at 08:51thay

          Edge is also a data connection :) .You must insert correct apn parameters from your provider.The apn parameter is the same for all android phones contact your provider for this.You can use apn parameters from galaxy s2 for example.

          • 26/10/2012 at 18:29lionelcgz

            The APN are correctly installed. I have checked on my old android phone in 2.3.6 and they are the same even if some more sections are present in the 4.0.4
            But that doesn’t work. I don’t understand at all.

          • 26/10/2012 at 20:07lionelcgz

            Someone on a forum found the problem.
            A slight changement in the proxy of the APN and PAP
            Now I can send and receive the MMS. :-)

  • 25/10/2012 at 09:03Manuel

    Hi,
    Try this :
    On the automatic configuration for mms 2 points are different and it is who jams:
    In mmsc, configuration of origin:
    proxy MMS: 192.168.010.200
    while it is necessary: proxy MMS: 192.168.10.200 so that that works
    and 2nd thing: type of authentification: PAP

    192.168.010.200 is for example

    In fact, every time you have one “0″, delete it
    Sorry for my bad english.
    Manuel

  • 27/10/2012 at 07:22Jessica Tang zopo

    great. if you do not mind, would you like to share it with other zopo users?
    thank you. have a great weekend.

    • 27/10/2012 at 08:37Manuel

      I’m happy if I can help a forum member!
      Great weekend.
      Manuel

    • 08/12/2012 at 19:42Manuel

      Hi,
      I have a zopo zp900.
      It ignites, but on a BLACK screen, not on ZOPO as on my zp300 +.
      It ignites (the battery works) but the phone does not give access to the menus.
      What do I have to make?
      Thank you.
      Sorry for my bad english.
      Manuel

      • 11/12/2012 at 04:54Jessica Tang zopo

        hi, do you know how to flash the phone?

  • 04/11/2012 at 14:53enes

    pleas help me. zp900 not dual standby
    replace a sim slot. but not change proplem, mono standby

    • 05/11/2012 at 08:07Manuel

      Did you put the same imei on 2 lines?

  • 06/11/2012 at 14:31enes

    imei 1 different imei2 but not change proplem mono standby

  • 09/11/2012 at 14:51enes

    please hep me mono standby proplem

    • 09/11/2012 at 15:26command

      which model you zopo

      • 09/11/2012 at 16:27enes

        zp900 leader
        replace a sim slot. but not change proplem, mono standby
        imei 1 different imei2 but not change proplem mono standby

        • 09/11/2012 at 21:13thay

          Go in settings . more – wireless & network enable gprs transfer prefer mode call prefer.In my phone works good

          • 10/11/2012 at 16:48eneskus

            gprs transfer prefer mode call prefer and or data prefer sellect but not change proplem mono standby

  • 15/11/2012 at 14:35arcus

    I changed the imei perfectly, but I do not work on 3g data connection, the voice works..help me

    • 15/11/2012 at 18:02thay

      3G connection is not related with it,you must have an active 3g plan on your sim ,correct apn in settings data enabled …and 3g signal from your provider

  • 22/11/2012 at 14:13mohammad

    i need usb driver?
    The first time USB cable connect to the computer, system will exam new
    hardware automatically, please find the file“65X3 usb driver”.

  • 23/11/2012 at 03:06Abubakar

    Hi,

    My zopo zp900 leader is not taking network. from where can i have a valid imei no. so as to make them validate on network. Help appreciated.

    Thank you

  • 23/11/2012 at 12:20mohammad

    from where i can get 65X3 usb driver?
    please help me
    my zopo 300+
    3g not working!

  • 27/11/2012 at 09:07NEKS108

    ZOPO 900 HOW TO CHANGE IMEI NUMBER ,ABOVE METHOD WE TRY BUT NOT GET SUCCESS,PLEASE TRY TO HELP TO CHANGE IMEI.I AM FROM INDIA

    • 06/12/2012 at 03:03Jessica Tang zopo

      what is your rom version?

      • 10/12/2012 at 06:01NEKS108

        MTK6577

  • 10/12/2012 at 07:16NEKS108

    ZP900

  • 10/11/2012 at 20:05thay

    If you mean to have full standby at the same time on all 2 sim slots there are no availability on MTK based phones.If you are talking at phone with sim 1 sim 2 is not available and the same with sim 2.Mtk based phones are full standby on 2 sim slots when idle but when one slot is busy other one is disabled.This is for all 2 sim MTK chipset phones

  • 11/11/2012 at 12:30enes

    you said zp900 half standby. I am not wait zopo company. There is a fault what you said. zp900 must be a full stand.

  • 11/11/2012 at 13:15thay

    Dual Sim Dual Standby – Both SIMs able to receive call in idle mode, while once active call on one SIM established, other SIM is in No-Service State.
    …from wikipedia http://en.wikipedia.org/wiki/Dual_SIM
    All MTK phones are dual sim dual STANDBY…….
    Phone works good this are MTK features
    What you search is an DSDA(Dual Sim Dual Active)or also DSFA (Dual Sim Full Active) Phone.
    Mtk based ones are not dsda but DSDS (Dual Sim Dual Standby)

Leave a Reply or trackback

*